info@marbletechnic.com

Dolomite marble surface

How it works

From Design Intent to Delivered Stone.

One point of contact in Turkey, and a clear sequence from brief to shipment.

How it works

From Design Intent to Delivered Stone.

Six stages, one point of contact. Nothing is reserved, cut or shipped without your approval at the stage it affects.

  1. 01

    Project Brief

    We understand the project, application, quantities, drawings and design requirements.

    Send what you have: drawings, a BOQ, reference images or a written description. We ask the questions that affect stone choice early, such as application, exposure, finish and programme.

  2. 02

    Material Research

    We identify suitable materials and suppliers.

    We match the brief to materials and to factories able to produce the required sizes, finishes and details, and flag early where a specified stone is a risk.

  3. 03

    Selection & Approval

    Material samples, slab photographs and technical information are presented for approval.

    You receive samples, numbered slab photographs and technical data. Nothing is reserved or ordered without your written approval.

  4. 04

    Technical Development

    Drawings, dimensions and fabrication requirements are reviewed and developed.

    Drawings are checked against slab sizes, veining, joint positions, cut-outs and tolerances. Shop drawings are prepared or coordinated so the factory cuts from agreed information.

  5. 05

    Production & QC

    Production is followed in Turkey with quality checks and progress documentation.

    We follow production at agreed stages and send photographs, measurements and notes. Deviations are raised while they can still be corrected.

  6. 06

    Packing & Shipment

    The finished material is prepared for export and logistics coordination.

    Crating, labelling and loading are followed and documented, and handed over to the logistics partner with the paperwork the supplier provides.

Procurement

Your Eyes on the Ground in Turkey.

Working with suppliers thousands of miles away can make communication, quality control and production follow-up difficult.

Marble Technic acts as your local technical and procurement representative in Turkey. We can:

  • Communicate directly with suppliers
  • Compare material options
  • Review quotations
  • Inspect slabs
  • Follow production
  • Check dimensions and details
  • Document quality
  • Coordinate packing
  • Assist with shipment preparation

Emailinfo@marbletechnic.com

Marble Technic · Inspection Report

Pre-packing inspection

Doc
QC-000
Stage
3 / 3
Project
Sample project
Material
Travertine, vein cut
Pieces
48
Inspected
48 / 48
Issues
2
Corrected
Yes
CheckSpecificationResultStatus
Material & colourApproved sampleConsistentPass
Vein directionPer slab layoutMatchedPass
Thickness20 mm ± 119.6 – 20.5 mmPass
Dimensions± 1 mm2 pcs over, recutCorrected
Cut-outsSD-014 rev BConformsPass
Edge profileEased 3 mmConformsPass
Surface finishHoned & filled1 pc refilledCorrected
PackingCrated, labelledConformsPass
Photographs36 attached
ReleaseApproved for packing

Sample format with illustrative values

FAQ

Questions From Project Teams.

For anything specific to your project, send us the details and drawings.

Emailinfo@marbletechnic.com

Do you sell stone directly?

Marble Technic primarily operates as a technical and procurement partner. Depending on the project structure, clients may purchase materials directly from suppliers while Marble Technic manages sourcing, technical coordination, procurement and quality control.

Can you source specific stones?

Yes. Send the stone name, a photograph or a sample reference. We check availability, supplier options and suitable alternatives in Turkey, and tell you clearly if a stone is not available in the quantity or quality the project needs.

Can you work with our existing supplier?

Yes. We can act as your technical and quality-control representative with a supplier you already use, covering drawing coordination, production follow-up and inspections.

Can you review architectural drawings?

Yes. We review drawings for stone-specific issues such as slab sizes, joint positions, cut-outs, edge details and tolerances, and return written comments before fabrication.

Can you prepare fabrication/shop drawings?

Yes. Shop drawings can be prepared or coordinated as part of technical development. Approval of drawings remains with the project's design team.

Can you inspect slabs before production?

Yes. Slabs can be photographed, numbered and reviewed for colour, veining and visible defects before cutting, so approval happens before material is committed.

Can you follow production?

Yes. We visit the factory at agreed stages and send progress photographs, measurements and notes.

Can you coordinate international shipping?

We coordinate packing, export preparation and loading with suppliers and the logistics partners appointed for the project. Freight terms, customs and import requirements are handled by the appointed forwarder and importer.

Which countries do you work with?

We work with clients internationally, with a focus on the United States, Canada, the United Kingdom, Europe and the Middle East.

What types of projects do you support?

Residential, hospitality, commercial, custom furniture and stone fabrication projects, including kitchen and bathroom countertops, from a single feature piece to phased supply for larger buildings.

Do you work with quartz and porcelain countertops?

Yes. Alongside natural stone, we source and manage the fabrication of engineered quartz and large-format porcelain countertops in Turkey, including drawings, cut-outs, edge details, quality control and packing.

Have a Stone Project in Turkey?

Tell us what you’re working on. We’ll help you determine the right material, supplier and technical approach.

info@marbletechnic.com

WhatsApp