Onyx & Travertine Coffee Table

A low coffee table with soft, rounded corners: a travertine frame around a pale onyx panel set flush into the top.

Travertine for the frame and sides, with onyx chosen for the inlaid top panel so the centre reads lighter than the frame around it.

We developed the piece in 3D and drew a full exploded view before any stone was cut. Rather than solid stone, the table is built as two matching modules. Each module sits on a welded 40 × 20 mm steel box-section frame with a 12 mm plywood base, clad in 20 mm travertine. The rounded ends follow an R177 outer radius, with curved travertine pieces on the corners. Concealed castors, 54 mm high, sit under the base so the table can be moved without lifting stone.

Stone cutting, cladding and assembly were carried out in Turkey, following the shop drawings for the stone and the steel framework.

A travertine frame around a pale onyx field, with soft radius corners and no visible metalwork.